Electra Elite IPK II
Document Revision 3
System Hardware Manual
11 - 23
___________________________________________________________________________________
___________________________________________________________________________________
3.5.2
Connecting the Cables on the CTA-U Unit
Connect the RS-232C cable from the computer to the connector on
the CTA-U Unit as shown in
Figure 11-28 Connecting the RS-232C
Cable to the CTA-U Unit on the Multiline Terminal
.
3.5.3
Installing the Driver on the PC
Using the setup disk provided with the CTA-U Unit install the driver
on your PC. Refer to the CTA installation Guide for instructions on
installing CTA setup disks.
3.6
Computer Telephony Adapter, CTU(8)-U Unit, with USB Interface
The CTU adapter connects to a PC USB port to provide telephony and sound
device control. The general functions of the CTU include:
J
Telephony Control
The application is based on the Microsoft Telephony Application
Programming Interface (TAPI) and provides call handling on the PC
(e.g., call, answer, Hold, Transfer, Conference, or Caller ID).
J
User Interface to support D
term
Emulation
This function provides the functions of D
term
such as normal telephone
indications, LCD, Line keys, or Hookswitch.
J
Sound Support
Allows voice recording or recording playing on an audio device assigned
to the PC. Voice Mail and Live Record are supported on the PC.
J
Supports Plug and Play
Figure 11-28 Connecting the RS-232C Cable to the CTA-U Unit on
the Multiline Terminal
Summary of Contents for ELECTRA ELITE IPK II
