___________________________________________________________________________________
12 - 6
Installing Single Line Telephones
___________________________________________________________________________________
Document Revision 3
Electra Elite IPK II
3.1.1
Wall Mounting the Telephone
1.
Remove the metal base from the telephone by removing the
two screws as illustrated in
Figure 12-5 Removing the Metal
.
2.
Lift the metal plate and note the direction of the tabs so that
they can be correctly reversed.
3.
Flip the metal base around as illustrated in
. Insert the tabs into the
receptacles marked (A) and reattach to the telephone using the
two screws that were previously removed.
Because of manufacturing variations in wall-mount brackets,
installing the terminal wall mount with optional screws offers the
most reliable fit.
Figure 12-5 Removing the Metal Base
Note Position of
Summary of Contents for ELECTRA ELITE IPK II
