2 - 302
Memory Blocks
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1
Electra Elite IPK
Notes
1-15-10
Calling Name Display Allow/Deny Selection
1-15-11
Centralized Billing Allow/Deny Selection
1-15-12
Centralized Billing – Point Code of Center Office Assignment
1-15-13
Centralized Day/Night Switching for Remote Office Assignment
1-15-14
Centralized Day/Night Switching for Main Office Assignment
3-70
CIC Number Assignment
5-05
Common Signaling Channel Route Selection
1-1-05
Start Time Selection
1-5-02
SMDR Print Format
1-5-13
Printer Connected Selection
1-5-14
Printer Line Feed Control Selection
1-5-25
SMDR Valid Call Time Assignment
1-5-26
SMDR Incoming/Outgoing Print Selection
1-8-35
COM Port Baud Rate Setting Assignment
4-56
SMDR Telephone Print Selection
1.
For Electra Elite IPK-to-Electra Elite IPK Network only one system can be set for Main. All other systems must
be set from Remote.
2.
When connected to a PBX, the Electra Elite IPK must be set for REMOTE in this Memory Block.
3.
When this Memory Block is set to NONE,
K-
CCIS does not function even when all other
K-
CCIS Memory Blocks
are allowed.
Related Programming (Continued)
M.B. Number
Memory Block Name
Summary of Contents for ElectraElite IPK
Page 2: ...PROGRAMMING MANUAL Stock Number 750825 Document Revision 1 Release 1000...
Page 3: ......
Page 5: ......
