Elite IPK
Document Revison 1
Programming Manual
2 - 503
___________________________________________________________________________________
___________________________________________________________________________________
4-44
Caller ID Preset Dial Outgoing CO
Selection
General Description
Use this Memory Block to assign the Trunk group, Route Advanced group, or Closed
Numbering group that is seized for ANI/Caller ID Outgoing Calls. Use the ANI/Caller
ID Scroll key to access the ANI/Caller ID to be called.
Display
Notes
Programming Procedures
1
Go off-line.
2
Press LK4 +
DD
to access the Memory Block.
3
Use the dial pad to enter Trunk Group, Route Advance group, or Closed
Numbering group Access Code to seize for ANI/Caller ID outgoing calls for
Tel Port No.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
B
+
A
to enter A for Port Numbers 100~109
B
+
B
to enter B for Port Numbers 110~119
B
+
C
to enter C for Port Number 120
Default Value
Not specified
4
Press
G
to write the data and display the next Memory Block.
5
Program the next Memory Block or press
E
to go back on-line.
1.
Setting Data is Access Code Assignment in Memory Blocks 1-1-46, 47, 48 [Access Code (1-Digit, 2-Digit, or
3-Digit) Assignment]. For example: Dial 9 (101)
→
Trunk Group 1
.
2.
Assign the ANI/Caller ID Scroll key using Memory Blocks 2-06 (Line Key Selection for Tenant Mode) or 4-12
(Line Key Selection for Telephone Mode).
3.
Telephone ports A0~C0 are ports 100~120. Use 1 for A, 2 for B, and 3 for C.
Telephone Mode
4
Submode
—
Data No.
44
PC Programming
¦
+AI
0 1 / 4 4 :
T I M E
D I S P L A Y
Setting
Data
Data
No.
Tel
Port
No.
(01
~
C0)
Summary of Contents for ElectraElite IPK
Page 2: ...PROGRAMMING MANUAL Stock Number 750825 Document Revision 1 Release 1000...
Page 3: ......
Page 5: ......
