2 - 570
Memory Blocks
___________________________________________________________________________________
Document Revison 1
Electra Elite IPK
___________________________________________________________________________________
,
1 C:
Port Number of CO/PBX Line
T:
Telephone Port Number (smallest number is displayed)
V:
Voice Recording Service Package
–:
No Display
B:
BSU No.
H:
CCH No.
U:
HUB No.
O
:
Enabled
Space:
Disabled
Notes
Related Programming
1.
ETU interface cards are assigned automatically during initial power up.
2.
ESI(8)-U
( )
ETU with ports 01 and 02 cannot be changed.
3.
When ETU system capacity is exceeded, ERROR is displayed on the LCD, and the Transfer key cannot be used
to write data.
4.
When changing an interface slot assignment to a different ETU, use the following procedure:
a.
Remove the ETU installed in the slot.
H
Power off ACD(8), VoIP, VMS, IPCA, or FMS ETU before removing it.
b.
Program the slot for new ETU in this Memory Block.
c.
Install the new ETU.
5.
VMS(2)/FMS(2)-U
( )
ETU must be assigned as a VMS(4)/FMS(4)-U
( )
ETU.
6.
Eight BSU(2)-U
( )
ETUs can be installed in the EXP Electra Elite IPK. Only three can be installed in the Basic
Electra Elite IPK.
7.
Page 2, LK 5 is used for indication only. The VDH2(8)-U( ) ETU cannot be assigned.
8.
Refer to Elite IPK Features and Specifications Manual, Universal Slots, for maximum capacities.
M.B. Number
Memory Block Name
7-3-00
MIF(ACD) Assignment
7-3-01
MIF(LCR) Assignment
7-3-02
MIF(SMDR) Assignment
7-3-03
MIF(UCD) Assignment
7-3-04
MIF(Caller ID) Assignment
1-2-04
Call Arrival Key Block Assignment
1-2-21
PS Telephone Block Assignment
1-2-32
IP Phone Block Assignment
Summary of Contents for ElectraElite IPK
Page 2: ...PROGRAMMING MANUAL Stock Number 750825 Document Revision 1 Release 1000...
Page 3: ......
Page 5: ......