3 - 6
Advanced Applications
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1
Elite IPK
1.4.6
Code Restriction Class Assignment when Lockout is Set (Memory
Block 1-1-70)
This Memory Block assigns the Code Restriction Class to be used
when Station Lockout (Outgoing) is set at a station. Station Lockout
can be set by the Attendant or from any station when allowed in
System Programming.
1.4.7
CO Feature Code Service For Code Restriction (Memory Block
1-1-82)
This Memory Block assigns feature codes per system. A station user
can dial these codes as the leading digits of a telephone number.
The Electra Elite ignores these digits and applies code restriction to
the remaining digits. The codes are sent to the CO as the leading
digits on permitted code restriction calls.
1.4.8
Trunk Digit Restriction Assignment (Memory Block 4-32)
This Memory Block specifies, per station, the maximum number of
digits that can be dialed from any outside line.
1.4.9
Code Restriction Class Assignment (Day Mode) (Memory Block
4-07)
This Memory Block specifies, per station, the Code Restriction Class
used when the system or a station that is assigned to a tenant is in
the Day Mode.
1.4.10
Code Restriction Class Assignment (Night Mode) (Memory Block
4-08)
This Memory Block specifies, per station, the Code Restriction Class
used when the system or a station that is assigned to a tenant is in
the Night Mode.
1.5
Code Restriction Tables (Default Values)
1.5.1
OCC Tables with Default Values
The following Memory Blocks are displayed:
OCC Table Assignment (1-1-67)
OCC Table to Trunk Group Assignment (5-03)
8-Digit Matching Table to OCC Table Assignment (1-1-68)
Summary of Contents for ElectraElite IPK
Page 2: ...PROGRAMMING MANUAL Stock Number 750825 Document Revision 1 Release 1000...
Page 3: ......
Page 5: ......
