3 - 16
Advanced Applications
___________________________________________________________________________________
___________________________________________________________________________________
Document Revison 1
Elite IPK
2.3.2
Class of Service (Station) Feature Selection 2 (Memory Block
1-8-08)
Use this Memory Block to allow/deny LCR Bypass (Page 3, LK4) for
Trunk Groups 02~32).
Default: Deny
Use this Memory Block to allow/deny ARS Overflow (Page 6, LK1) to
trunk group 01 when programmed route is busy.
Default: Deny
2.3.3
ARS Allow/Deny Selection (Memory Block 1-14-00)
Use this Memory Block to specify whether or not to Allow ARS to
function system wide.
Default: NO
2.3.4
ARS Dialing Assignment (Memory Block 1-14-01)
Use this Memory Block to assign a dialing plan to one of four LCR
tables. A maximum of 128 (up to 8 digits) dialing combinations are
possible for each table.
Default: Not Assigned
2.3.5
ARS Dial Allow/Deny Selection (Memory Block 1-14-02)
Use this Memory Block to specify whether or not to Allow digits that
are entered in the ARS dialing assignment to be routed using the
ARS feature.
Default: YES
2.3.6
ARS Route Table Number Assignment (Memory Block 1-14-03)
Use this Memory Block to assign each ARS Dialing Assignment to
an ARS Route Assignment (01~32).
Default: 00 (Not used)
2.3.7
ARS Trunk Group to Route Number Assignment (Memory Block
1-14-04)
Use this Memory Block to specify whether a Trunk Group (TKGP) or
Route Advance Group (RAB) is used by each ARS route number.
Trunk Group 1 origination (NORMAL) is used in the USA.
When
the
call is not originated by pressing the line key or by dialing an access
code of Trunk Group 1, and the LCR Class assignment is 0, the call
is originated as is.
Default: NORMAL
Summary of Contents for ElectraElite IPK
Page 2: ...PROGRAMMING MANUAL Stock Number 750825 Document Revision 1 Release 1000...
Page 3: ......
Page 5: ......