NEC EXIFU-A1 Installation, Configuration And Operation Download | Manualshive

Page: 30 / 33

background image

Compact Flash

30

XN120 EXIFU Guide

Upgrade the XN120 Main Unit Software

The operating system software of the XN120 system can be upgraded by installing a compact flash card into
the socket of the EXIFU card.
The compact flash card has the new revision of XN120 system software copied onto it.

You can confirm the revision of the XN120 system software at any XN120 telephone with a display.
With the phone idle press OPAC and dial 3
The top row of the display will show the software revision (example below is Version 01.30)

The display will revert to normal after 3 seconds.

Flash card type

You will need a compact flash card of 16Mbytes or larger.

How to build the compact flash card for the XN120 system software.

·

The files on the compact flash card must be taken from the XN120 Technical CD.

·

Ensure there are no other files on the compact flash card.

·

The compact flash must be formatted in FAT. The XN120 will not read the files if the compact flash card is
formatted in another type e.g FAT32.

To build the compact flash card you will need the XN120 system software from the XN120 Technical CD.

1. Insert the blank compact flash card into your PC.
2. Insert the CD into your PC and from the main menu screen select the

XN120 System Software

link.

3.  You will see each version of XN120 software in separate folders.
4.  Double click the folder that contains the version of XN120 software you want to use.
5.  Within the folder select ALL files then copy them onto the compact flash card.
6.  The structure of the compact flash card will look similar to the screen shot below.
7.  The compact flash card is now ready to be inserted into the EXIFU card to perform the software

upgrade.

Main Ver: 01.30

0-Cf-80-D0-13-2A

CAUTION

In the event that the upgrade is not successful you may need to use another compact flash card.

We recommend that you test your compact flash card by upgrading a test XN120 before you use it for the

first time.

Do not use an untested compact flash card at a customer’s system.

«
...
28
29
30
31
32
...
»

Summary of Contents for EXIFU-A1


































Reviews:

No comments

Related manuals for EXIFU-A1

Brand: K-array Pages: 20

Brand: Uniden Pages: 68

Brand: Talkswitch Pages: 32

VOIP-500 Series

Brand: Talkaphone Pages: 90

Brand: Yealink Pages: 2

Brand: Yealink Pages: 2

Brand: Yealink Pages: 3

Brand: Yealink Pages: 6

T48S Skype For Business Edition

Brand: Yealink Pages: 3

Brand: Yealink Pages: 6

Brand: Yealink Pages: 4

Brand: Yealink Pages: 2

Brand: Panasonic Pages: 68

Brand: Meridian Pages: 10

Exubera Pro UC EV9333-50

Brand: Everpure Pages: 2

Brand: Nakamichi Pages: 32

Scalekleen EV9796-01

Brand: Everpure Pages: 2

Brand: Rockville Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands