1. POST Error Message
Express5800/E120g-M Maintenance Guide
168
Chapter 3 Appendix
Error Message
Cause
Action
9082
Link width Error between
CPU1 and CPU2
Connection decline was detected on
bus width between CPU1 and CPU2.
Contact your sales representative.
9E80
Forced to use CPU with
error.
An error was detected in CPU, but the
CPU was forcedly enabled.
A001
Memory Error detected in
CPU1_DIMM1
An error was detected in
CPU1_DIMM1.
A002
Memory Error detected in
CPU1_DIMM2
An error was detected in
CPU1_DIMM2.
A003
Memory Error detected in
CPU1_DIMM3
An error was detected in
CPU1_DIMM3.
A004
Memory Error detected in
CPU1_DIMM4
An error was detected in
CPU1_DIMM4.
A005
Memory Error detected in
CPU1_DIMM5
An error was detected in
CPU1_DIMM5.
A006
Memory Error detected in
CPU1_DIMM6
An error was detected in
CPU1_DIMM6.
A007
Memory Error detected in
CPU1_DIMM7
An error was detected in
CPU1_DIMM7.
A008
Memory Error detected in
CPU1_DIMM8
An error was detected in
CPU1_DIMM8.
A00D
Memory Error detected in
CPU2_DIMM1
An error was detected in
CPU2_DIMM1.
A00E
Memory Error detected in
CPU2_DIMM2
An error was detected in
CPU2_DIMM2.
A00F
Memory Error detected in
CPU2_DIMM3
An error was detected in
CPU2_DIMM3.
A010
Memory Error detected in
CPU2_DIMM4
An error was detected in
CPU2_DIMM4.
A011
Memory Error detected in
CPU2_DIMM5
An error was detected in
CPU2_DIMM5.
A012
Memory Error detected in
CPU2_DIMM6
An error was detected in
CPU2_DIMM6.
A013
Memory Error detected in
CPU2_DIMM7
An error was detected in
CPU2_DIMM7.
A014
Memory Error detected in
CPU2_DIMM8
An error was detected in
CPU2_DIMM8.
A428
Cluster On Die was not ready.
Cluster On Die feature does not work
effectively with the current hardware
configuration.
Replace the processor that supports this
feature, or disable
Cluster On Die
in
SETUP.
A429
DIMM population is
insufficient for Cluster On
Die.
Cluster On Die feature does not work
effectively with the current memory
configuration.
Check that memory setting is correct.
A800
Memory not detected
No valid memory is installed.
Check if DIMMs are properly installed.
A801
PEI_MEMORY_NONE_USEFUL
No valid memory is installed.
Check if DIMMs are properly installed.
A804
Latest memory module is
corrupted.
Failure on BIOS Flash ROM was
detected.
Contact your sales representative.
AE01
CPU1_DIMM1 has been
disabled.
A memory error was detected.
CPU1_DIMM1 has been disabled.
AE02
CPU1_DIMM2 has been
disabled.
A memory error was detected.
CPU1_DIMM2 has been disabled.
AE03
CPU1_DIMM3 has been
disabled.
A memory error was detected.
CPU1_DIMM3 has been disabled.
AE04
CPU1_DIMM4 has been
disabled.
A memory error was detected.
CPU1_DIMM4 has been disabled.
AE05
CPU1_DIMM5 has been
disabled.
A memory error was detected.
CPU1_DIMM5 has been disabled.
AE06
CPU1_DIMM6 has been
disabled.
A memory error was detected.
CPU1_DIMM6 has been disabled.
