5. Troubleshooting
Express5800/E120g-M Maintenance Guide
32
Chapter 1 Maintenance
[?]
The following message appears when logging on to Windows Server 2008 R2
Have you finished license authentication for Windows product?
→
The above message will appear if you use Windows Server 2008 R2 with the unauthenticated license.
Choose
Get genuine now
and proceed license authentication.
The above message is an example of request for license authentication.
5.5
Problem of Windows STOP Error
[?]
Unable to turn off the power at the blue screen (STOP error screen)
→
Perform the forced shutdown (continue to press the power switch for at least four seconds) to turn off
the server.
5.6
Problem of RAID System
[?]
Unable to rebuild the RAID array
Is the capacity of the hard disk drive to be rebuilt enough?
→
Use a hard disk drive with the same capacity as that of the faulty hard disk drive.
Is the logical drive RAID0?
→
RAID0 cannot be rebuilt because it has no redundancy.
[?]
Unable to automatically rebuild the RAID array
Did you wait for sufficient time until the hard disk drive was replaced?
→
Follow the steps below to use the auto-rebuilding feature.
(1) Remove a failure HDD.
(2) Wait for at least 90 seconds.
(3) Install a new HDD.
