1. System BIOS
Express5800/E120g-M Maintenance Guide
91
Chapter 2 Useful Features
(2)
Power Control Configuration submenu
From the
Server
menu, move the cursor to
Power Control Configuration
and then press the <Enter> key to
show its submenus.
For details about the options, see the table below.
Option Parameter
Descriptions
AC-LINK
Stay Off
[Last State]
Power On
Specify AC link feature. Specify how the DC power state
should be when the AC power is supplied again after loss
of power. (See the table below)
Power ON Delay Time Mode
[Manually Setting]
Random
Select a method to specify the delay time before powering
on DC power. Available options are: "User-specified value"
or "random value".
This option is selectable when
Power On
or
Last State
is
specified in
AC-LINK
.
Delay Time
[45]-600
Specify the delay time.
The minimum configurable time may be changed from
factory-set value.
The minimum configurable time is displayed when
executing
Load Setup Defaults
.
This menu appears when
Manually Setting
is specified
for
Power ON Delay Time Mode
.
Standby Power Save
[Disabled]
Enabled
Enable or disable the feature that saves the standby power
on standby. If this option is set to
Enabled
, the
AC-LINK
setting is fixed to
Power On
automatically and cannot be
changed. With AC power off state, management,
monitoring, and power-on of server are disabled on remote
site. Powering on the server is available only by pressing
the POWER switch on the server.
If AC-LINK setting is changed from the remote site with
this option being set, you need to press the POWER
switch twice to power on the server.
Cold Redundant Mode
[Disabled]
Enabled
Enable or disable Cold Redundancy feature.
For details, see
Chapter 2 (1.14 Cold Redundant Feature)
in
User's Guide
.
[ ]: Factory setting
