2. Server Configuration
Express5800/R120g-1M, R120g-2M Maintenance Guide
111
Chapter 2 Useful Features
(2/2)
Item Description
Default
Value
LDAP (Property)
LDAP Authentication
Enable or disable LDAP authentication.
Disable
IP Address
Specify the IP address.
*11
0.0.0.0
Port Number
Specify the LDAP port number.
*11
389
Search Base
Specify the search base used in LDAP authentication.
*11
*12
Blank
Bind Domain Name
Specify the bind domain used in LDAP authentication.
*11
*12
Blank
Bind Password
Specify the bind password used in LDAP authentication.
*11
*13
Blank
LDAP (Group)
*11
Group Name
Specify the LDAP group name.
Blank
Group Search Base
Specify the search base of LDAP group.
*12
Blank
Privilege
Specify privilege of LDAP group.
*4
Administrator
Operator
User
Administrator
*1: Can be specified if a user exists.
*2: Up to 15 characters including alphanumeric, hyphen (-), and underscore (_) can be used. Note, however, User Name must
not start with hyphen (-). In addition, "InternalUseOnly", "null", "MWA", "AccessByEM-Poem", and names which are already
assigned for other number are not allowed.
*3: Up to 19 ASCII characters can be used excluding " " (blank), " (quotation), & (ampersand), ? (question mark), = (equal sign),
#, and ¥.
*4: Privileges are defined as follows:
Administrator : User who has administrator right. All operations are allowed.
Operator :
User who can operate the machine. Session management, license registration, remote KVM/media,
configuration, and update are not allowed.
User :
General user. Viewing IPMI information only is allowed.
*5: Can be specified only when Active Directory authentication is set to "Enable".
*6: Up to 64 ASCII characters can be used excluding " " (blank), ",", ";", ":", "|", "=", "+", "*", "?", "<", ">", "@", """, "¥", "[", and "]".
*7: ASCII characters in the range between 6 and 127 can be used excluding blank.
*8: Up to 255 characters including alphanumeric, hyphen, underscore, and period can be used.
*9: If Active Directory authentication is set to "Enable", at least one domain controller server must be enabled.
*10: Can be specified only when domain controller server is set to "Enable"
*11: Can be specified only when LDAP authentication is set to "Enable".
*12: Characters in the range between 4 and 62 including alphanumeric, hyphen, underscore, period, comma, and equal sign can
be used.
*13: Alphanumeric characters in the range between 4 and 31 excluding ", #, and ¥ can be used.
