9. Offline Tools
Express5800/R120g-1M, R120g-2M Maintenance Guide
53
Chapter 1 Maintenance
9.2
Features of Offline Tools
Offline Tools has the following features.
Note
Disable RDX by setting RDX to hibernate mode before starting Offline Tools.
•
Off-line Maintenance Utility
Off-line Maintenance Utility is started when
Maintenance Utility
is chosen. Off-line Maintenance Utility is
used for preventive maintenance and failure analysis for the server. If you are unable to start NEC
ESMPRO due to a failure, Off-line Maintenance Utility can be used to check the cause of the failure.
Note
Off-line Maintenance Utility is intended for maintenance personnel. Consult with your sales
representative if a trouble that requires Off-line Maintenance Utility occurs.
Off-line Maintenance Utility has the following features.
−
IPMI Information Viewer
Displays System Event Log (SEL), Sensor Data Record (SDR), and Field Replaceable Unit (FRU) in
Intelligent Platform Management Interface (IPMI) and also back up such logs.
Using this feature, system errors and events can be investigated to locate the parts to be replaced.
You can also clear the SEL area, and specify the operation when the SEL area becomes full.
−
System Information Viewer
Displays and saves information on processor (CPU) or BIOS.
−
System Information Management
Sets the information specific to your server (Product information, Chassis information)
•
Server Configuration Utility
−
Use this utility to specify the alert notification feature by EXPRESSSCOPE Engine 3 and use the remote
management feature by "PC for management".
