1. Installing Internal Optional Devices
Express5800/R120h-2M (2nd-Gen) User’s Guide
123
Chapter 2 Preparations
3.
Attach the appropriate retaining clip parts to the air baffle.
The locations of primary, secondary and tertiary are shown in the figure. Attach the clip parts according to
each configuration.
4. Install the high performance heat sink. See
High-performance CPU heat sink module
Attach the air baffle. See Chapter 2 (
1.33 Attaching the air baffle
).
6.
Unfasten two screws securing the rear blank cover, and pull up the blank cover to remove it.
7.
Remove the blank cover of the riser card which you intend to install GPU.
Open the parts fixing the blank cover to direction (1) and remove the blank cover by pulling it out to direction
(2).
