1. Installing Internal Optional Devices
Express5800/R120h-2M (2nd-Gen) User’s Guide
172
Chapter 2 Preparations
2.
Remove all the riser cards.
Raise the screw handle at the top of the riser card, turn it 180 degrees to the left, hold the both ends of the
cage and lift it straight up to remove it.
3.
Connect the power cable for the mid-plane drive cage to the motherboard.
4.
Lift up the latch of the drive cage.
5.
Install the drive cage.
Note
Do not drop the drive cage onto the motherboard. Dropping the drive cage onto
the motherboard may damage the motherboard or other components. Remove all
drives and attach the drive cage to the device using both hands.
(1) Attach the back side of the mid-plane drive cage to the standard positioning pins.
(2) Position the remaining pins on the back of the mid-plane drive cage with the device, and insert the
pins.
(3) Slowly lower the opposite side of the mid-plane drive cage.
