2. Description on System Utility
Express5800/R120h-2M (2nd-Gen) User’s Guide
242
Chapter 3 Setup
Notes
When a restore is performed while the OS is running, reboot the server to reflect the RBSU settings.
Configurations whose backup and restore are possible are the menus under
System Utilities – System
Configuration
-
BIOS/Platform Configuration (RBSU)
of System Utility.
Do not use the backup data on any server other than the backup source server. If the backup data is
restored on a different server, the Serial Number and Product ID of the backup source server are
overwritten to the server on which the data is restored. In this case, enter the Serial Number and Product ID
by referring to "Serial Number and Product ID are lost" in
"5.11 Supplementary notes"
in
"5.
Troubleshooting"
in
Chapter 1
of
"Maintenance Guide"
.
The following menus and menus under them cannot be backed up or restored.
[Date and Time]
－
[Date (mm/dd/yyyy)]
[Date and Time]
－
[Time (hh:mm:ss)]
[Server
Security]
－
[Secure Boot Settings]
[Server
Security]
－
[TLS (HTTPS) Options]
[Server
Security]
－
[Device Encryption Options]
[Network
Options]
－
[iSCSI Configrations]
[Boot
Options]
－
[UEFI Boot Settings]
[Boot
Options]
－
[Legacy BIOS Boot Order]
The following Information display menus cannot be backed up or restored.
‑
Status
‑
Version and revision of firmware
You cannot restore RBSU in case the System ROM version is different between the time of restoring and
the time of backup.
You cannot restore some RBSU in case there is a difference in hardware configuration between the time of
back up and that of restore.
