1. Specifications
Express5800/R120h-2M (2nd-Gen) User’s Guide
252
Chapter 4 Appendix
1.
Specifications
Part Number
N8100-2775F
N8100-2776F
N8100-2777F
N8100-2778F
CPU
On-board CPU, operation
frequency
Number of cores (C)/
threads (T) (1CPU)
Intel Smart Cache (Last
level cache)
See the attached file “On-board CPU”
Number of standard
installation/ maximum
installation
0/2
Chipset
Intel
®
C621 Chipset
Memory
On-board capacity
standard/ maximum
Not included in Standard Installation/ (Option)
Registered DIMM: 1536GB (24x 64GB), Load Reduced DIMM: 3.0TB (24x 128GB)
On-board Memory
DDR4-2933 Registered DIMM (8/16/32/64GB), DDR4-2933 Load Reduced DIMM (64/128GB)
Maximum operation
frequency
2933MHz (See the attached file “On-board CPU” regarding the maximum operation frequency of each CPU)
Error Detection and
Correction
ECC, x4 SDDC
Memory sparing
Capable
Memory mirroring
Capable
Secondary
memory
device
Drive
bay
Built-
in slot
Front
8x2.5 inch drive
(BOX3 standard)
8x2.5 inch additional drive
(option, up to two,
BOX1/2)
Or 8x2.5 inch additional
drive
(option x1 BOX2) + 2x2.5
type additional drive
(option x1 BOX1)
24x2.5 inch drive
8x3.5 inch drive
(BOX2/3 standard)
2x2.5 inch additional
drive
(option up to 1 BOX1)
12x3.5 inch drive
Rear
2x2.5 inch drives (option, up to three)
2 x 2.5 inch drives (up to three options),
or 2 x 2.5 inch drive (option 1) +3 x 3.5 drives
(option 1)
Internal
parts
－
4x3.5 inch additional drive (optional up to 1)
2x M.2 SATA slots
Built-in
standard
－
Maximum
built-in
2.5 inch HDD: SATA
48TB (24x 2TB), SAS
57.6TB (24x 2.4TB)
2.5 inch SSD: SATA SSD:
92.16TB (24x 3.84TB),
SAS SSD
：
23.04TB
（
24
×
960GB
）
(When an optional HDD
cage is added)
2.5 inch HDD: SATA
60TB (30x 2TB), SAS
72TB (30x 2.4TB)
2.5 inch SSD: SATA
115.2TB (30x 3.84TB),
SAS SSD
：
28.8TB (30
×
960GB)
(When an optional
HDD cage is added)
3.5 inch HDD: SATA
180TB(15x 12TB),
Near Line SAS
180TB(15x 12TB) +
2.5 inch HDD: SATA
8TB (4x 2TB), SAS
9.6TB(4x 2.4TB),
2.5 inch SSD: SATA
15.36TB (4x 3.84TB),
SAS SSD
：
3.84TB (4
×
960GB)
(When an optional
HDD cage is added)
3.5 inch HDD: SATA
228TB(19x 12TB),
Near Line SAS
228TB(19x 12TB) +
2.5 inch HDD: SATA
4TB (2x 2TB), SAS
4.8TB (2x 2.4TB),
2.5 inch SSD: SATA
7.68TB(2x 3.84TB),
SAS SSD
：
1.92TB (2
×
960GB)
(When an optional
HDD cage is added)
Hot-swap Capable
Interface specification
and RAID configuration
SATA 6Gb/s : RAID 0/1/5/6/10/50/60 (Option),
SAS 12Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Optical disk drive
Connection of built-in/ external drive (Option) *1
FDD
Option: flash FDD(1.44MB) *2
Expansion bay
－
Expansion Corresponding
Slots
Standard configuration
1x PCI Express 3.0 (x16 lanes, x16 sockets) (full-height, half-length/Slots2)
2x PCI Express 3.0 (x8 lanes, x8 sockets) (full-height, full-length/slot 1, half-length/slot 3)
1x PCI Express 3.0 (x8 lanes, x8 sockets) (dedicated for RAID controller)
1x PCI Express 3.0 (x8 lanes, x8 sockets) (exclusive use for LOM card)
(You can change PCI configuration by preparing optional raiser cards. See the system configuration guide
for the detailed information. )
Graphics
Built-in chips/ video RAM
Internal management controller chip/ 16MB
Graphics and resolution
1677 million colors: 640x480, 800x600, 1,024x768, 1,280x1,024, 1,600x1,200, 1,920x1,200
