4. Names and Functions of Parts
Express5800/R120h-2M (2nd-Gen) User’s Guide
39
Chapter 1 General Description
Item
Status
Description
Processor LED
Lights off
Normal state
Amber
Processor has failed
DIMM LED
Lights off
Normal state
Amber
The DIMM has failed or there is a configuration problem
Cooling fan LED
Lights off
Normal state
Amber
The cooling fan has failed or is not recognized
NIC LED
Lights off
Not linked to the network.
If the NIC LED is off, check the status with LED on the backside
of the unit.
Lights in green
Linked to the network
Flashes in green
Linked to the network and working in operation
Power unit LED
Lights off
Normal state
Lights in amber
The power subsystem is degraded, the power supply unit has
failed, or the input power is disconnected
Riser Card LED
Lights off
Normal state
Amber
Riser card unit is not correctly installed
Overtemperature
LED
Lights off
Normal state
Amber
High temperature detected
AMP status LED
Lights off
AMP mode disabled
Lights in green
AMP mode enabled
Lights in amber
Failover
Flashes in amber
Invalid configuration
Power Capping LED
Lights off
The system is in standby state, or the upper limit of power
consumption is not set
Lights in green
The upper limit of power consumption is applied
When the STATUS LED on the front panel lights in amber or red, it indicates that an event has occurred on the
server. For details, refer to
(4) Status LED Panel combined LED descriptions
in the next section.
