1. Installing Internal Optional Devices
Express5800/R120h-2M (2nd-Gen) User’s Guide
60
Chapter 2 Preparations
4.
Match the TPM kit with the connector grooves on the motherboard. Press the connector in firmly
and install the TPM kit. Please check the location of the TPM connector on the motherboard by
looking at the quick reference level attached to the back of the top cover.
Note
If you try to remove the already attached TPM from the motherboard you may cause
injury to the TPM cover, TPM, and motherboard. If it was installed on a different
device, the data (including the key) stored in TPM are deleted when the power is
turned on. the TPM that has been removed from the original server and installed
on another server.
5.
Installing the TPM cover.
(1) Align the holes and locking latches on both sides of the TPM connector.
(2) Press down the center of the cover firm and straight until you hear a locking sound.
6.
Re-attach the options and cables that were removed in step 3.
7. See
Chapter 2 (1.34 Installing Top Cover)
to attach the top cover of the server.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
