1. Installing Internal Optional Devices
Express5800/R120h-2M (2nd-Gen) User’s Guide
184
Chapter 2 Preparations
1.34
Installing Top Cover
When all internal optional devices are installed, close the server with Top Cover.
Please have ready a hexalobular driver (t-10) or flathead driver.
Leave the hood latch open and place the top cover straight on the unit so that it is securely inserted
in the frame. Adjust the position of the top cover so that it protrudes approximately 1.25 cm (0.5 inch)
from the rear of the unit.
Press down on the hood latch. Slide the top cover until it is completely closed.
Tighten the security screw on the hood latch with hexalobular screwdriver (T-10) or flathead driver.
Hoot latch
(1)
(1)
(2)
(2)
Close
Open
Security screw
