background image

 

 

 

-  3 - 

August

 

2016   

855-911221-105-A 

 Preface 

1.

Thank you very much for purchasing our product. 
This installation guide explains how to set up the LAN Drivers. 

 

1.1. The target server 

Refer to the URL below and check the target server. 

http://www.58support.nec.co.jp/global/download/index.html

 

-> Click model name(product name). 

-

> Click “LAN Driver Module(V17.2)(Windows Server 2012 R2/Windows Server 2012)” in “Other update”. 

 

1.2. Target software 

 

*1    Above information is based on 2016/07 

Refer the Server Configuration Guide for the latest information. 
The latest drivers are published on our NEC Express5800 Support Website. 

*2    Refer to the Server Configuration Guide for correspondence Option LAN Board. 

 

1.3. Target Driver Version 

The target driver version before and after update are listed in the following. 
If the driver version in use is not listed in the following, this update is not necessary. 
Related to the confirmation method of installed version, please refer to [3.2 Confirmation of LAN driver version]. 

Target software 

Target driver version 

(b57nd60a.sys) 

After update version 

(b57nd60a.sys) 

Windows Server 2012 

15.6.0.10 

17.2.0.2 

Windows Server 2012 R2 

16.2.0.4 

17.2.0.2 

 

1.4. Registration Trademark 

Microsoft, Windows, Windows Server, Hyper-V are registered trademark or trademarks of the Microsoft in the U.S. 
and other countries. Broadcom, the pulse logo, Connecting everything, the Connecting everything logo, NetXtreme, 
Ethernet@Wirespeed, LiveLink

, and Smart Load Balancing

  are among the trademarks of Broadcom Corporation 

and/or its affiliates in the United States, certain other countries, and/or the EXPRESSCLUSTER is registered 
trademark of the NEC corporation. In addition, TM and an R mark are not specified in the test.

   

 
 

 

Abbreviated designation 

Software Production Name 

Windows Server 2012 

Microsoft® Windows Server® 2012 Standard 
Microsoft® Windows Server® 2012 Datacenter 

Windows Server 2012 R2 

Microsoft® Windows Server® 2012 R2 Standard 
Microsoft® Windows Server® 2012 R2 Datacenter 
Microsoft® Windows Server® 2012 R2 Foundation 

Summary of Contents for Expres5800/A2040b


























Reviews: