BMC Configuration User’s Guide
IMPORTANT:
You can not install BMC Configuration in the following case.
-- Installation on guest OS virtual of machine.
The following packages are necessary to use BMC Configuration on Red Hat Enterprise
Linux Server 6(x64), Red Hat Enterprise Linux Server 7(x64) or Oracle Linux 6(x64). If
these are not installed, you need to install them from the install disc of operating system.
-- glibc i686
-- nss-softokn-freebl i686
-- libxml2 i686
-- zlib i686
CHECK:
Red Hat Enterprise Linux Server 7 is supported by the upper version from BMC
Configuration for Linux Ver.1.41.
2.3
Server Management Driver
On Linux, OpenIPMI Driver must be started to use BMC Configuration.
CHECK:
Use the following command to confirm that OpenIPMI Driver has been installed on Linux.
rpm -qa | grep -i OpenIPMI
If the OpenIPMI Driver is stopped, you need to start OpenIPMI Driver. You can confirm
the status of OpenIPMI Driver by the following command.
/etc/init.d/ipmi status
If "not loaded" is displayed after executing the above command, please start OpenIPMI
Driver by the following command.
/etc/init.d/ipmi start
And you can start OpenIPMI Driver automatically at the system booting to execute the
following command and reboot the operation system.
chkconfig ipmi on
