General Description 2-33
Optical Disk Drive
The server is provided with the optical disk drive on its front to read data from a disc.
CAUTION
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
Do not leave the tray ejected from the optical disk drive.
Set a disc on the optical disk drive in the following procedure.
1.
Confirm that the power of the server is on (with the POWER LED being lit) before setting
the disc on the optical disk drive.
2.
Press the Eject button on the front of the optical disk drive.
The tray comes out a little.
3.
Hold the tray lightly and pull it out toward you until the tray stops.
4.
Put the disc on the tray carefully and securely with the character printed surface facing
upward.