1-4-11
120Rh-1
LAN connection
<1000BASE-T / 100BASE-TX / 10BASE-T>
2
LAN I/F
(RJ-45)
LAN I/F
(RJ-45)
• Standard on-board LAN interfaces can configure AFT/ALB.
• Standard LAN interface and optional LAN board cannot configure AFT/ALB.
Serial I/F
(D-sub 9pin)
Serial I/F
(D-sub 9pin)
(Front panel)
1
1
(Rear panel)
• One serial I/F is on the front panel and the other is on the rear panel.
- 1.5m [K210-01(01)]
RS-232C straight cable
- Modem, etc.
RS-232C devices
UPS
- Local procurement
• One power unit is supplied as standard.
• To configure hot plug Redundant Power Supply in the 120Rh-1 (except non-
redundant models [N8100-1401F/-1402F/-1405F]), use an optional power supply
unit [N8181-50F].
2
Power Unit
(Empty slot)
- [N8181-50F]
Power Unit
Fans
Rack mount option
- [N8143-70]
Cable Arm
• The Cable arm [N8143-70] is used to bundle cables at rear.
• The dimension with the Cable arm [N8143-70] is 485Wx890Dx43Hmm
(including front bezel and protruding objects).
*An empty power unit slot is not provided in N8100-1401F/-1402F/-1405F.
• The 120Rh-1 (except non-redundant models [N8100-1401F/-1402F/-1405F]) is
equipped with redundant cooling fans as standard.
• Additional cooling fans cannot be installed.
