General Description 2-3
Front View with Front Bezel Attached
The following figure shows the location of the front system features.
ID
1
2
3
4
-2
5
7
4
-1
6
1 Front
bezel
The front bezel is a cover protecting the front devices during daily operation. A security key is
provided to lock the cover.
2 Key
slot
Insert the security key into this slot when unlocking the front bezel.
3 STATUS LED (green/amber) (on the front panel)
This LED indicates the server status. The LED is green during normal operation. The LED
turns amber or flashes when the server enters the abnormal state.
4 ACT LED (green)
This LED is on while the system is connected to the network. The number "1" on the icon
indicates LAN port 1, and the number "2" indicates LAN port 2.
5 DISK ACCESS LED (green/amber)
This LED is green during access to the internal hard disk drives. The LED turns amber when
even one of the internal hard disk drives fails.
6 POWER LED (green)
This LED turns green when the power is turned on.
7 UID LED (blue)
This LED goes on when the UID switch is pressed. (The LED also goes on or blinks when
software issues a command.)
Summary of Contents for Express5800/120Ri-2
