7-8 Troubleshooting
On-screen error message
Cause
Action
9064 Mixed CPU Steppings
detected
Different CPU steppings are
found.
Check supported CPUs and
replace them. If replacing the
CPU does not help, replace
CPU/IO module.
9002 Memory not installed.
DIMM is not implemented.
DIMM is faulty.
Mount or replace the DIMM.
9003 Memory
implementation error
detected
Error is detected on memory
implementation.
Check supported DIMMs and
replace the DIMM. If replacing the
DIMM does not help, replace the
CPU/IO module.
9006 HW Memory Test failed.
Memory is faulty.
Replace the DIMM. If replacing it
does not help, replace the
CPU/IO module.
9000
A serious error occurred
during a POST.
There are some error messages
in addition to this error code.
Check the other error message.
9090-9097
A memory error has
occurred, or memory is
faulty.
(a) Verify that the memory is
mounted properly.
(b) Replace the memory. If this
does not help, replace the
module.
Summary of Contents for Express5800/320Fd-MR
