1. Installing Internal Optional Devices
Express5800/E120d-1 User’s Guide
59
Chapter 2 Preparations
1.7.4
Installation
Install a DIMM by using the following procedure.
1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Push the DIMM straight into the socket.
When a DIMM is inserted into the socket,
the lever automatically closes.
Important
Make sure the direction of the DIMM. The DIMM has a notch,
preventing being incorrectly inserted.
Do not apply too much pressure when pushing a DIMM into the
socket. Doing so can damage the socket or terminal part.
3. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.
4. Confirm that no error messages are displayed in POST screen.
If any error messages are displayed, refer to
Chapter 3 (2.BIOS Setup Utility (SETUP))
for BIOS Setup
Utility.
5. Run BIOS Setup Utility, and select
Memory Configuration
and then
Memory Information
from the
Advanced
menu. Make sure the capacity of added DIMM is displayed properly.
Refer to
Chapter 3 (2.BIOS Setup Utility (SETUP))
for BIOS Setup Utility.
6. Select
Memory Configuration
from the
Advanced
menu, and then specify
Yes
for
Memory Retest
.
After that, select
Save Changes and Exit
to reboot.
Notch
Key
