5. RAID System Configuration
Express5800/E120g-M Maintenance Guide
149
Chapter 2 Useful Features
5.3.5
Others
(1)
Clear Configuration
Use this feature to clear configuration information. From the TOP menu, select
Controller Management
, and
then
Clear Configuration
to clear all configuration information.
If old configuration information for the physical device remains, configuration may fail. In this case, execute
"Clear Configuration".
Note
To remove a virtual drive, select
Virtual Drive Management
and then
Select Virtual
Drive Management
and confirm that the virtual drive you want to delete is displayed for
Select Virtual Drive
. Select
Delete Virtual Drive
. When a confirmation message is
displayed, select
Yes
, and then select
OK
.
(2)
Place Drive Online
Use this feature to forcibly put a physical device in the FAIL status online.
From the TOP menu, select
Drive Management
and then
Select Drive Operations
, confirm that the target
physical device is displayed for
Select Drive
, select
Drive Operation
,
Place Drive Online
, and then
Start
Operation
. When a confirmation message is displayed, select
Yes
, and then select
OK
.
(3)
Rebuild Rate
Use this feature to specify the rebuild rate.
From the TOP menu, select
Controller Management
,
Change Controller Properties
, and
Rebuild Rate
.
The available value is between 0% and 100%. The default value (recommended) is 30%.
Select
Apply Changes
and, when a confirmation message is displayed, select
OK
.
(4)
Physical device information
Use this feature to display physical device information.
From the TOP menu, select
Drive Management
and then
View Drive Properties
, and then select
Select
Drive
to select the physical device you want to check.
