1. POST Error Message
Express5800/E120g-M Maintenance Guide
175
Chapter 3 Appendix
(3)
Error messages on a virtual LCD
You can confirm the error messages by using the EXPRESSSCOPE Engine 3 web browser window.
For details, See "
EXPRESSSCOPE Engine 3 User’s Guide
".
The table below shows the error messages displayed on upper and lower lines, cause, and action.
If the same error appears even if the action is performed, contact your sales representative.
•
Messages displayed on an upper LCD line
BIOS Message
on Upper LCD Line
Cause Action
XX POST Started
Displayed while POST is running.
"XX" denotes POST code that is
running.
This is not an error.
XX BIOS Version YYYY
Displayed while POST is running.
"XX" denotes POST code that is
running, and "YYYY" denotes
system BIOS version.
POST Completed Successfully
POST completes normally.
POST ERROR XXXX
Error XXXX is detected during
POST.
Check the message displayed on LCD,
and take an appropriate action.
No Available Memory in System
No available memory is
implemented.
Make sure that the memory is correctly
implemented.
Error Pause in POST
POST detected an error and
paused.
Check the message displayed on LCD,
and take an appropriate action.
Entering BIOS SETUP MENU
Starting up BIOS SETUP MENU. This is not an error. This message will
disappear when SETUP operation is
completed.
Waiting for normal temperature
A temperature abnormality was
detected inside the server.
Lower the room temperature or turn off
the power to cool the server to room
temperature before starting up the
server. If this abnormality continues to
occur, check if a fan has failed.
BIOS Recovery Running
BIOS recovery is in progress.
This is not an error. Wait until BIOS
update is completed.
BIOS Updater Running
BIOS update is in progress.
System Configuration change is
detected
The CPU or memory
configuration has changed.
If this message appears even when no
configuration change has been made,
contact your sales representative
PCI Bus System Error x
(x: PCI slot number)
A system error was detected in
PCI bus.
Contact your sales representative.
PCI Bus Parity Error x
(x: PCI slot number)
A parity error was detected in PCI
bus.
DIMM #x Uncorrectable Error (x:
DIMM number)
Uncorrectable memory error was
detected.
DIMM #x Correctable Error (x: DIMM
number)
A frequent occurrence of
correctable memory error was
detected.
PCIx Slot Uncorrectable Error
(x: PCI slot number)
Uncorrectable error was detected
on PCIe bus of PCI card installed
in PCI slot x.
Contact your sales representative.
Message displayed on
upper LCD line
Message sent from BIOS
Message displayed on lower
LCD line
Message sent from BMC
