1. Installing Internal Optional Devices
Express5800/GT110d User’s Guide
44
Chapter 2 Preparations
1.5
Removing the Front Bezel
Remove the front bezel by using the following procedure.
1.
Refer to steps 1 to 3 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2.
Pull the three release tabs on the front bezel (
) and
then pull the front bezel forward until it comes off the
frame (
).
Important If you pull the front bezel forward too much, you will break the right hook.
Gently slide it to prevent damaging the equipment.
3.
Slide the front bezel to the left to release the tabs that
are engaged with the right frame of the server and
remove the front bezel.
4.
Lay the server so that the right side of the cover faces downward
Lay it down slowly and gently.
