SYSTEM CONFIGRATION GUIDE
–
NEC Express5800/R110i-1
NEC Corporation
Revision 2.0
– June, 2017
27
Using iSCSI
See the table below for supported network interfaces and OS combinations.
Category
Network Interface
Operating Systems
1GbE
Embedded 1GbE NIC/
N8104-150/-151/-152
Windows Server 2012, Windows Server 2012 R2, Windows Server 2016,
Red Hat Enterprise Linux 7, VMware
10GbE
N8104-149
Windows Server 2012, Windows Server 2012 R2, Windows Server 2016,
Red Hat Enterprise Linux 7, VMware
N8104-157
Windows Server 2012, Windows Server 2012 R2,
Windows Server 2016, Red Hat Enterprise Linux 7, VMware
NOTE:
NIC Teaming feature is not supported on iSCSI interfaces.
6.2
External Storage Controller
6.2.1
RAID Controller
Category
Product Name / Description
Part Number
Controller
RAID Controller (2GB, RAID0/1/5/6)
Broadcom MegaRAID SAS 9380-8e
RAID0/1/5/6/10/50/60, 2GB, Ext. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA
6Gb/s, Flash Backup Unit included
N8103-179
NOTE:
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of
becoming multiple hard drives failure during the RAID rebuilding process.
It is recommended to set RAID array configuration drives less than eight in order to minimize the risk of becoming multiple hard
drives failure.
6.2.2
Fibre Channel / SAS Controller
Category
Product Name / Description
Part Number
Fibre Channel
Fibre Channel Controller (1ch)
Emulex LightPulse LPe1250-F8 Host Bus Adapter
8Gb/s, Optical, PCIe 2.0 x8
N8190-159
Fibre Channel Controller (2ch)
Emulex LightPulse LPe12002-M8 Host Bus Adapter
8Gb/s, Optical, PCIe 2.0 x8
N8190-160
Fibre Channel Controller (1ch)
QLogic QLE2690-SR-CK Host Bus Adapter
16Gb/s, Optical, PCIe 3.0 x8
N8190-161
Fibre Channel Controller (2ch)
QLogic QLE2692-SR-CK Host Bus Adapter
16Gb/s, Optical, PCIe 3.0 x8
N8190-162
SAS
SAS Controller
LSI SAS9212-4i4e Host Bus Adapter
6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8
N8103-142
SAS Controller
LSI SAS9300-8e Host Bus Adapter
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0 x8
N8103-184
Graphics Accelerator
Product Name / Description
Part Number
Graphics Accelerator
NVIDIA NVS 315, PCI Express 2.0 (x16)
1x DVI-VGA connector, DMS-59-DVI-I branch cable included
N8105-48
NOTE:
The standard VGA connector cannot be used when this option is installed.
The remote KVM feature is not supported when this option is installed.
