●
About Smart Storage Battery
Smart Storage Battery is indicated with Energy Pack on the RBSU menu. Please paraphrase.
●
About EXPRESSBUILDER Help
If the EXPRESSBUILDER help is different from Maintenance Guide, do not use the help but the guide.
●
Restriction of Server Diagnostic Karte Service
・
If you want to use Server Diagnostic Karte Service on Windows Server 2019/Windows Server 2016, download
and install the file from link below.
NEC suppport portal
https://www.support.nec.co.jp/View.aspx?&id=9010106809
●
About FCoE function in N8104-173
The FCoE function (Fibre Channel over Ethernet) isn't supported with this product as NEC.
The FCoE function is enabled in spite of the LOM firmware version.
It is recognized as the FCoE device on the OS, but when not using it from OS and drivers it does not cause any problem
for the operation.
Please ignore detection of the following device.
-HPE 533FLR-T FCoE Device
●
About the Intel(R) Software Guard Extensions (SGX) option
The CPUs that support this function are only the following two types of CPUs.
Even if Intel(R) Software Guard Extensions (SGX) option is displayed on the other CPUs, please do not change from
Disabled (default value) setting.
This function is not supported except for the following 2 types of CPU.
・
N8101-1507 (4C/E-2174G)
・
N8101-1518 (6C/E-2186G)
●
About the N8103-184 SAS Controller
Please keep the following restrictions when using N8103-184.
・
Number
:
Up to 1pc can be installed. Mixing with other cards is still possible.
・
Installed PCI slot
:
slot 1.
●
About Wake On LAN function in N8104-173
When using the Wake On LAN function with PORT2 in N8104-173 (Dual Port 10GBASE-T LOM Card), update the
firmware version to 7.19.2 or higher in advance.
●
About the setting when the N8117-12 Management Lan with Serial kit are installed
When the option of the N8117-12 (Management Lan with Serial kit) are installed and the management LAN is used,
change the setting as follows.
◆
Procedure to change settings
In the System Utilities, select System Configuration > BMC Configuration Utility > Network Options >
Network Interface Adapter > [ON]