5. Details of EXPRESSBUILDER
Express5800/R120g-1E Maintenance Guide
172
Chapter 2 Useful Features
5.
Details of EXPRESSBUILDER
EXPRESSBUILDER helps you to install Windows and maintain the server.
EXPRESSBUILDER also provides bundled software and instruction manuals.
5.1
Starting EXPRESSBUILDER
You can start EXPRESSBUILDER by using the following ways:
Internal Flash Memory:
Remove a CD/DVD and removable media from the server, restart the server and press <F3> key at the
following POST message.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
When EXPRESSBUILDER starts from Internal Flash Memory, Boot Selection Menu shown in
Chapter 2
(6.2 Menus of EXPRESSBUILDER) - (1) Boot Selection Menu
will appear.
Windows Application:
After installing Starter Pack in the server, you can run EXPRESSBUILDER as a Windows application.
Run
NEC EXPRESSBUILDER
from Start Menu or run the shortcut on the desk top.
When
EXPRESSBUILDER starts as a Windows application, Autorun Menu shown in
Chapter 2 (6.2 Menus
of EXPRESSBUILDER) - (4) Autorun Menu
will appear.
EXPRESSBUILDER DVD:
EXPRESSBUILDER DVD can be downloaded from the following website.
http://www.nec.com/
Use the DVD by the following two ways:
(1) Insert the DVD into the server, and then restart.
Boot Selection Menu shown in
Chapter 2 (6.2 Menus of EXPRESSBUILDER) - (1) Boot Selection
Menu
will appear.
(2) Insert the DVD into a computer running Windows.
Autorun Menu shown in
Chapter 2 (6.2 Menus of EXPRESSBUILDER) - (4) Autorun Menu
will appear.
Summary of Contents for Express5800/R120g-1E
Page 223: ...MEMO...
