6. Windows System Recovery
Express5800/R120g-1E Maintenance Guide
44
Chapter 1 Maintenance
6.2
Recovery of Windows Server 2008 R2
If the Windows does not start normally, you can recover it using the system recovery option.
We recommend that this option is performed by the system administrator.
For details, refer to Windows Help.
If the RAID controller driver is required, take the following steps:
1.
Turn on the power to the display and this server in that order or restart.
2.
When "Press <F2> Setup, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network" appears
on the lower left of the POST screen, press the <F3> key.
3.
Start the OS from the OS installation media.
The message "Press any key to boot from CD or DVD..." appears on the upper part of the screen.
To boot from the media, press the <Enter> key.
While boot-up proceeds, the message "Windows is loading files..." appears.
4. Choose
Repair your computer
in
Windows Setup wizard
.
5. Click
Load driver
, and then choose
OK
.
6.
Specify the following and click
Add Drivers
:
Specify the drive labeled INTER-FLASH.
(When using EXPRESSBUILDER DVD, specify the optical disk drive.)
For N8103-176/177/178 RAID controller:
\014\win\winnt\drivers\01_storage\1_an_01\megasas2.inf
For on-board RAID controller (LSI Embedded MegaRAID):
\014\win\winnt\drivers\01_storage\1_al_08\megasr1.inf
The driver installation is completed.
Summary of Contents for Express5800/R120g-1E
Page 223: ...MEMO...