1. POST Error Message
Express5800/R120g-2E, T120g Maintenance Guide
206
Chapter 3 Appendix
(3) Error messages on a virtual LCD
You can confirm the error messages by the EXPRESSSCOPE Engine 3 web browser window. See
EXPRESSSCOPE Engine 3 User’s Guide
for details.
The table below shows the error messages displayed on upper and lower lines, cause, and solution.
•
Messages displayed on an upper LCD line
BIOS Message
on Upper LCD Line
Cause Solution
XX POST Started...
This message appears while POST is
running.
"XX" means a POST code in
progress.
This is not an error.
XX BIOS Rev YYYY
This message appears while POST is
running.
"XX" means a POST code in
progress, and "YYYY" means the
system BIOS version.
POST Completed Successfully
POST completes normally.
POST ERROR XXXX
Error XXXX occurred during POST.
Check the displayed message and take
an appropriate action.
No Available Memory in System
No available memory is implemented. Make sure that the memory is correctly
implemented.
Error Pause in POST
POST detected an error and paused. Check the displayed message and take
an appropriate action.
Entering BIOS SETUP MENU
Starting up BIOS SETUP MENU.
This is not an error. This message will
disappear when SETUP operation is
completed.
Waiting for normal temperature
A temperature abnormality was
detected inside the server.
Lower the room temperature or turn off
the power to cool the server to room
temperature before starting up the
server. If this abnormality continues to
occur, check if a fan has failed. If the
same error still continues to occur,
contact your representative.
BIOS Recovery Running
BIOS recovery is in progress.
This is not an error. Wait until BIOS
update is completed.
BIOS Updater Running
BIOS update is in progress.
System Configuration change is
detected
The CPU or memory configuration
has changed since the previous
startup.
If this message appears even when no
configuration change has been made,
contact your sales representative
PCI Bus System Error 1
A system error was detected in PCI
bus.
Contact your sales representative.
PCI Bus Parity Error 1
A parity error was detected in PCI
bus.
CPUx_DIMMx Correctable Error
(x: DIMM number)
A frequent occurrence of correctable
memory error was detected.
Memory DIMM Sparing Fail-over
on CPUx (x: CPU socket number)
Memory Sparing feature failed over to
standby memory.
Memory Mirroring Fail-over on
CPUx (x: socket number)
Memory Mirroring feature failed over
to standby memory.
Message displayed on
upper LCD line
Message sent from BIOS
Message displayed on lower
LCD line
Message sent from BMC
Summary of Contents for Express5800/R120g
Page 231: ...MEMO...
