●
Note on using N8116-84 SAS Expander Card
When updating firmware from this Starter Pack (Ver S8.10-009.01), please do NOT apply the following firmware update
module (Ver.5.08).
[Package Name]
Supplement Upate / Online ROM Flash Component for Linux (x64) ? HPE 12Gb/s SAS Expander Firmware for
HPE Smart Array Controllers and HPE HBA Controllers
(firmware-smartarray2de15b6882-5.08-1.1x86_64)
Please check the following Starter Pack Version S8.10-009.01 public page for detailed application procedures.
[Starter Pack Version S8.10-009.01]
<
https://www.58support.nec.co.jp/global/download/
>
-> Document & Software
-> Rack
-> (Select your server model)
●
Note on using N8154-107/120 2.5-inch Hot Plug Drive Cage Kit.
If you use this server and 2.5-inch Hot Plug Drive Cage Kit, please change following setting as below.
◆
Setting Procedure
In the System Utilities,
System Configuration > BIOS/Platform Configuration (RBSU) >Advanced Options > Fan and Thermal Options >
Thermal Configuration > [Increased Cooling]
●
Caution for operating N8104-195 Dual Port 10GBASE-T LOM Card
If you use this server and Dual Port 10GBASE-T LOM Card, please change following setting as below.
◆
Setting Procedure
In the System Utilities,
System Configuration > BIOS/Platform Configuration (RBSU) >Advanced Options > Fan and Thermal Options >
Thermal Configuration > [Increased Cooling]
●
Notes of using SAS controller (N8103-184)
When using N8103-184, “Status“ of iLO Web interface [System Information] - [Storage] - [Storage Controller] is might
display to “Unknown”, but it does not affect server operation and SAS Controller operation.
●
About FCoE function in N8104-173/177
The FCoE function (Fibre Channel over Ethernet) isn't supported with this product as NEC.
The FCoE function is enabled in N8104-173 in spite of the LOM firmware version, in N8104-177 with Family Firmware
Version after 8.35.43.
It is recognized as the FCoE device on the OS, but when not using it from OS and drivers it does not cause any problem
for the operation.
Please ignore detection of the following device.
-HPE 533FLR-T FCoE Device
-HPE 622FLR-SFP28 FCoE Device
●
About Wake On LAN function in N8104-173
When using the Wake On LAN function with PORT2 in N8104-173 (Dual Port 10GBASE-T LOM Card), update the
firmware version to 7.19.2 or higher in advance.
●
About Smart Storage Battery
Smart Storage Battery is indicated with Energy Pack on the RBSU menu. Please paraphrase.
●
About EXPRESSBUILDER Help
If the EXPRESSBUILDER help is different from Maintenance Guide, do not use the help but the guide.
43
