(8) Fan and Thermal Options Menu
When you select
System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Fan and
Thermal Options
from the System Utilities, the
Fan and Thermal Options
menu appears.
For details about the additional parameter, see the table below.
Option Parameter
Description
Thermal Configuration
[Optimal Cooling]
Increased Cooling
Maximum Cooling
Enhanced CPU Cooling
Use this option to select the fan cooling solution for the
system.
"Optimal Cooling" provides the most efficient solution by
configuring fan speeds to the minimum required speed to
provide adequate cooling.
"Increased Cooling" runs fans at higher speeds to provide
additional cooling. Select "Increased Cooling" when third-party
storage controllers are cabled to the embedded hard drive
cage, or if the system is experiencing thermal issues that
cannot be resolved.
"Maximum Cooling" provides the maximum cooling available
on this platform.
"Enhanced CPU Cooling" provides additional cooling to the
processors. When running certain processor intensive
workloads, this option can provide additional cooling to the
processors which can result in improved performance.
[ ]: Default setting
(9) Advanced Debug Options Menu
When you select
System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced Debug Options
from the System Utilities, the
Advanced Debug Options
menu appears.
For details about the additional options, see the table below.
Option Parameter
Description
Advanced Crash Dump
Mode
[Disabled]
Enabled
Use this option to enable the Advanced Crash Dump Mode. When
enabled, the system will be configured to log additional debug information
to the Active Health System logs when an unexpected system crash is
experienced. This option should only be enabled when directed by
qualified service personnel.
[ ]: Default setting
(10) Embedded Applications Menu
When you select Embedded Applications from the System Utilities, the Embedded Applications menu appears. For
details about the options, see the table below.
Option Parameter
Description
Embedded Diagnostics -
This product does not support it.
47
