1. Installing Internal Optional Devices
Express5800/R120h-2M User’s Guide
133
Chapter 2 Preparations
9.
See Chapter 2 (1.28 Installing Top Cover) to attach the top cover of the server.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
10. Please
see
Chapter 2 (2 Installation and Connection)
in this manual to conduct installation and connection,
and turn the power supply ON.
Installing the Tertiary Riser Drive Cage (N8154-95)
Important To prevent personal injury, electrical shock or equipment damage, unplug the
power cord and ensure no power is supplied to the server. You cannot turn
off the system power supply completely by the power button on the front
panel. Until the AC power cord is unplugged, the power supply circuit is still
active in some parts of the machine.
Please prepare the following before installing the options.
Parts included in the option kit
T-10 hexalobular driver
To install the components, follow these steps.
1.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
If there is no secondary riser card, unfasten the screws (x2) securing the blank cover, and pull the blank
cover upward to remove it.
