2. Installation and Connection
Express5800/R120h-2M User’s Guide
169
Chapter 2 Preparations
Attaching the inner rail to the server
As seen from the front side of the rack, attach the outer rail (LEFT) to the left, and the outer rail (RIGHT) to
the right.
Slide the inner rail to the rear side of the unit, in accordance with the four protrusions on the side of the unit.
At this time, check whether the lock located around the center of the inner rail clicks to be securely locked.
Removing the inner rail
Lifting a little the metal plate part located around the center of the inner rail, then the lock will be released.
Slide it forward in the unlocked state, and it can be removed
Attaching the outer rail to the rack
Insert the round protrusion on the outer rail into the square hole of the 19-inch rack. Make sure that it makes
a clicking sound indicating that it is locked.
The figure on left shows the front side of the right outer rail. The figure on right shows the rear side of the
right outer rail.
Rear
Front
Rear
Front
Left inner rail
Right inner rail