background image

1. System Utilities

 

 

Express5800/R120h-1M, R120h-2M  Maintenance Guide 

68

Chapter 2  Useful Features 

 

 

For details about the options, see the table below. 

Option Parameter 

Description 

System Configuration 

Displays the 

System Configuration

 menu.

 

You can 

use this option to set up the System Utilities, the other 
system devices, and the option card devices. 

One-Time Boot 

Displays the 

One-Time Boot

 menu. Use this option to 

boot the system only one time from a device not 
dependent on the predefined boot order. Selecting a 
device through 

One-Time Boot

 menu does not change 

the predefined boot order. 

Embedded Application 

Displays the [Embedded Application] menu. By using 
this option, you can update 

Embedded UEFI Shell

[EXPRESSBUILDER], and firmware or display 
[Embedded Diagnostics], [Integrated Management 
Log], and [Active Health System Log]. 

System Information 

Displays the 

System Information

 menu. Use this 

menu to view system information including the system 
name, system ROM version, date, processor 
information, and memory information. 

System Health 

Displays the 

System Health

 menu.

 

Use this option to 

display the health status of all the devices within this 
machine. When an error is detected during POST, 
<F2> View Information/Errors appears. This starts up 
by pressing the <F2> key. 

Exit and resume system boot 

Exits the System Utilities and continues with the usual 
boot process. 

Reboot the System 

Exits the System Utilities and restart the BIOS. 

Select Language 

[English] 
Simplified Chinese 
Japanese 

Changes the current language of the system. 

Seup Browser Selection 

GUI 
Text 
[Auto] 

Selects the setup browser to use. In the [Auto] mode, 
use [Text] when the user enters the System Utilities via 
the serial console or [GUI] when the user enters it via 
the IRC or physical terminal. 

 

 

[    ]:  Default setting

 
 

 

Summary of Contents for Express5800/R120h-2M







































































































































































































































Reviews: