11. System Diagnostics
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
118
Chapter 1 Maintenance
11.
System Diagnostics
System Diagnostics runs several tests on the server.
From the
Tool menu
of EXPRESSBUILDER, select
Test and diagnostics
to diagnose the system.
11.1
Tests
The following items are tested in System Diagnostics.
Memory
CPU cache memory
Hard disk drive
Important To avoid affecting a network and storage system, disconnect a LAN cable,
Fibre Channel, NEC Storage, and other external storage before running
System Diagnostics.
Tips
No data is written on the disk when checking the hard disk drives.
11.2
Usage of System Diagnostics
After turning off the server or restarting the server, run System Diagnostics in the following procedure.
1. Run EXPRESSBUILDER and choose
Tool menu
from Boot Selection Menu.
For more information, see
Chapter 3 (5. Details of EXPRESSBUILDER)
.
Note
Choose
English
if
Language selection menu
appears.
2. Choose
Test and diagnostics
.
3. Choose
End-User Mode (Basic)
to run System Diagnostics.
This process takes about three minutes.
When the diagnostics is completed, the screen display changes as shown below.
See
eupro_ug_en.pdf
in the \isolinux\diag folder of EXPRESSBUILDER for the
End-User Mode
(Professional)
feature.
Supervisor-Mode
is intended for maintenance personnel.
Summary of Contents for Express5800/R310e-E4
Page 267: ...MEMO...
