1. Hard Disk Drive Operations
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
139
Chapter 2 Configuring and Upgrading the System
Note
The verification process is automatically performed after 12 hours from reboot and
every 1 month.
The setting for automatic verification process is stored in
Task Scheduler
of Windows
OS in the following format.
Task name: RdrFirstVerify
Task name: RdrVerifyLun X (X: Virtual disk number)
Example: RdrVerifyLun 1 (when the virtual disk number is 1)
The task execution date and time can freely be set by using
Task Scheduler
.
The time required for verification depends on the disk size and load.
For 300GB disk, it takes about 80 minutes.
(b) Stop Verify RDR Virtual Disk
Verification of RDR virtual disk in progress can be stopped.
1. Click
Start Screen
○
↓
RDR Utility
(or
Start
–
All Programs
–
RDR
–
RDR Utility
) to start RDR
Utility.
2. Right-click
RDR Virtual Disk x
in the left pane and click
Stop Verify RDR Virtual Disk
.
3. In the
Stop Verify RDR Virtual Disk
dialog box, click
OK
.
(c) Set Resync Priority
Priority of synchronization by RDR can be specified. By changing the priority, I/O load during
synchronization can be reduced.
1. Click
Start Screen
○
↓
RDR Utility
(or
Start
–
All Programs
–
RDR
–
RDR Utility
) to start RDR
Utility.
2. Right-click
RDR Virtual Disk x
in the left pane and click
Set Resync Priority
.
3. When a dialog box appears, select
Low
,
Normal
or
High
(a default is
Normal
) and click
OK
.
4. In the
Set Resync Priority
dialog box, click
OK
.
(d) Set RDR LUN Load Balancing
On or off of load balancing can be specified.
When the load balancing is on (default), the read process is performed alternately from two physical disks
forming the RDR Virtual Disk to improve performance. When it is off, the read process is performed from the
physical disk specified as Active RDR Plex.
1. Click
Start Screen
○
↓
RDR Utility
(or
Start
–
All Programs
–
RDR
–
RDR Utility
) to start RDR
Utility.
2. Right-click
RDR Virtual Disk x
in the left pane to change the priority and click
Set RDR LUN Load
Balancing
.
3. When a dialog box appears, select
On
or
Off
(a default is
On
) and click
OK
.
4. In the
Set RDR LUN Load Balancing
dialog box, click
OK
.
Summary of Contents for Express5800/R310e-E4
Page 267: ...MEMO...
