5. Installing Optional Devices
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 Maintenance Guide (Windows)
199
Chapter 2 Configuring and Upgrading the System
5.7.3
Removing PCI Card
To remove PCI card, follow the reverse procedure of the installation, and then install the blank cover.
5.7.4
Replacing PCI Card
Follow the steps below to replace the failed PCI card.
(1)
N8804-011 10GBASE-T 1ch Adapter Kit and N8804-012 1000BASE-T 2ch Adapter Kit
1. Identify the failed card by viewing Event Log.
2. Remove the duplex LAN according to
Chapter 2 (3.1.4 Removing Duplex LAN)
or
Chapter 2 (3.2.4
Removing Duplex LAN)
.
3. Remove the CPU/IO module according to
Chapter 2 (5.4.1 Removing CPU/IO Module)
.
4. Remove the PCI card.
5. Replace the card and secure it.
6. See
Chapter 2 (5.4.2 Installing CPU/IO Module)
and install the CPU/IO module.
The installed CPU/IO module will start automatically.
7. Confirm that the PCI card is correctly recognized by POST and OS.
8. Create the team again. For details, see
Chapter 2 (3.1.3 Configuring Duplex LAN)
or
Chapter 2 (3.2.3
Configuring Duplex LAN).
9. Connect the network cable.
(2)
N8803-040/040F Fibre Channel 1ch Adapter Kit or N8803-040AF Fibre Channel 1ch Adapter
Kit
1. Identify the failed card by viewing Event Log.
2. Remove the CPU/IO module according to
Chapter 2 (5.4.1 Removing CPU/IO Module)
.
3. Configure WWPN of Fibre Channel card to be installed (setting/confirming access control) by using
control software such as NEC Storage Manager.
4. Remove the PCI card.
5. Replace the card and secure it.
6. See
Chapter 2 (5.4.2 Installing CPU/IO Module)
and install the CPU/IO module.
7. Connect the network cable and cables for optional devices.
The installed CPU/IO module will start automatically.
8. Confirm that the PCI card is correctly recognized by POST and OS.
(3)
N8803-041 SAS controller
1. Identify the failed card by viewing Event Log.
2. Remove the CPU/IO module according to
Chapter 2 (5.4.1 Removing CPU/IO Module)
.
3. Remove the PCI card.
4. Replace the PCI card and secure it.
5. See
Chapter 2 (5.4.2 Installing CPU/IO Module)
and install the CPU/IO module.
6. Connect the network cable and cables for option devices.
The installed CPU/IO module starts automatically.
7. Confirm that the PCI card is correctly recognized by POST and OS.
Summary of Contents for Express5800/R310e-E4
Page 267: ...MEMO...
