5. Installing Optional Devices
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
157
Chapter 2 Configuring and Upgrading the System
ft server utility
Select
ftServer
-
CPU Module
-
CPU Module (to be removed)
-
Bring Up/Bring Down
-
Down
.
Repeat the steps above for the PCI module and confirm that the status of the CPU/IO module and the IO
module (PCI module) are "Removed".
Tips
When removing CPU/IO module 0, select
Bring Down
for CPU module (ID:0) and PCI
module (ID:10)
2. Remove the front bezel.
3. Disconnect the power cord of a module to be removed.
The stopper will go down when you disconnect the cable.
Important Check whether the stopper goes down after disconnecting the power cord. If you
disconnect the cable and the stopper does not go down, you cannot pull out the
CPU/IO module in the next step.
In case the stopper does not go down, insert CPU/IO module deeply once again.
Stopper
