5. Installing Optional Devices
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
168
Chapter 2 Configuring and Upgrading the System
5.6.1
Installing CPU
Follow the steps below to install a CPU and heat sink.
1. Shut down the OS.
The server turns off automatically.
2. Disconnect the power cords from the outlets.
3. Remove the CPU/IO module according to
Chapter 2 (5.4.1 Removing CPU/IO Module)
.
4. Remove the air duct according to
Chapter 2 (5.5.1 Installing DIMM)
.
5. Locate the CPU socket.
6. Remove the protective cover from the CPU socket.
Important Keep and store the removed protective cover for future use.
7. Put the heat sink with CPU on the socket gently and carefully.
Important Pay attention not to touch the bottom of the CPU (pin section).
Note
Bring down the CPU straight without tilting or sliding it in the socket.
