5. Checking the Duplex State of Modules
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
49
Chapter 1 Maintenance
6. Restart the stopped PCI module.
Click
Up
of
Bring Up/Bring Down
to the PCI module which has been stopped, and the PCI module will
be started.
Tips
When the PCI module is started, PCI module diagnosis, mirror volume duplication and PCI
module duplication are performed.
Important If Arcserve Backup or Backup Exec is installed and the backup software related
services are operating at the time of PCI module startup, the PCI module is not
duplexed properly may occur or backup software may not work properly.
Be sure to stop the services before starting the PCI module.
1. Start Services from Administrative Tools of Control Panel.
2. Select a service of backup software.
3. Choose "Stop" from the "Action" menu.
4. Repeat steps 2 and 3 for all services of the backup software.
If the PCI module is started with these services being operated, stop the PCI module
first, then stop the services related to backup software, then try again.
Tips
You can stop or start services collectively by using the batch file.
Arcserve Backup (Stop collectively)
C:\Program Files (x86)\CA\ARCserve Backup\cstop.bat
Arcserve Backup (Start collectively)
C:\Program Files (x86)\CA\ARCserve Backup\cstart.bat
Backup Exec (Stop collectively)
C:\Program Files\Veritas\Backup Exec\bestop.bat
Backup Exec (Start collectively)
C:\Program Files\Veritas\Backup Exec\bestart.bat
The path name shown above is assigned when the software is installed with default setting.
