1. Installing Internal Optional Devices
Express5800/T110h-S User’s Guide
63
Chapter 2 Preparations
Install a 2.5-inch HDD cage in the server by using the following procedure.
See
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
1.
To remove the side cover and the front bezel, see
Chapter 2 (1.3 Removing the Side Cover
and
2.
.
Mount the rollers that come with the HDD cage on
3.
the holes inside the HDD bay (10 places).
Insert the HDD cage into the HDD bay. The "C side"
4.
must face upward. Do not push the HDD cage to the
end for connecting cables later.
Connect the interface cable and power cable to the HDD cage. Use the interface cable that comes
5.
with the HDD cage. Use the power cable connected to the motherboard in advance. For details of
cable connection, see
Chapter 2
) described later.
Push the HDD cage to the end. Insert one side of the
6.
lock plate into the slit of the chassis. Push the lock
plate in the direction shown by the arrow to lock the
HDD cage.
Important
Make sure to insert the lock plate into the groove of the chassis correctly. Incorrect
installation causes the removal of the side cover to be impossible.
