1. Installing Internal Optional Devices
Express5800/T110h-S User’s Guide
35
Chapter 2 Preparations
1.3
Removing the Side Cover
Remove the side cover by using the following procedure.
1.
See the steps 1 to 3 in
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
2.
Unlock the chassis, if necessary.
3.
Lay the server slowly and gently so that the side
cover faces upward and remove a screw.
4.
(1) While pressing the two release buttons, (2) slide
the cover toward the rear of the server, (3) lift it in
the direction shown by the arrow, and then (4)
remove the cover in the direction shown by the
arrow.
(3)
(4)
Release
button
Release
button
(1)
(1)
(2)
Screw
