1. System BIOS
Express5800/T120e Maintenance Guide
70
Chapter 2 Useful Features
Option Parameter
Description
Serial Port A Settings
Serial Port A
Disabled
[Enabled]
Enables or disables serial Port A
Serial A Base I/O
[3F8h]
2F8h
3E8h
2E8h
Specifies the base I/O address for serial port A.
Serial A Interrupt
[IRQ 4]
IRQ 3
Specifies the interrupt for serial port A
Serial Port B Settings
Serial Port B
Disabled
[Enabled]
Enables or disables serial Port B
Serial B Base I/O
3F8h
[2F8h]
3E8h
2E8h
Specifies the base I/O address for serial port B
Serial B Interrupt
IRQ 4
[IRQ 3]
Specifies the interrupt for serial port B
Console Redirection Settings
BIOS Redirection Port
[Disabled]
Serial Port A
Serial Port B
Specifies a serial port for direct connections using NEC
ESMPRO Manager or hyper terminal.
When this feature is enabled, the following options are
displayed.
Terminal Type
[VT100+]
VT-UTF8
PC-ANSI
Selects the terminal type.
Baud Rate
9600
19200
57600
[115200]
Specifies baud rate.
Data Bits
7
[8]
Specifies the data bit width
Parity
[None]
Even
Odd
Specifies parity type.
Stop Bits
[1]
2
Specifies stop bits
Flow Control
None
[Hardware RTS/CTS]
Specifies the flow control method.
Continue C.R. after POST
Disabled
[Enabled]
Specifies whether to continue the console redirection feature
after POST processing.
[ ]: Factory settings