APPENDIX D MOUNTING OF PLASTIC SPACERS
User’s Manual U11595EJ5V0UM
63
(2) When using the IE-703002-MC + option board
(a) When using the IE-703002-MC + option board
<1> Remove the nylon rivet from the rear part of the pod.
<2> Fix the plastic spacer with the supplied plastic screw.
<3> To adjust the hight, use your own spacer or a stand.
Figure D-2. Mounting Method (When Using IE-703002-MC + Option Board)
Target system
Plastic spacer
(b) When mounting plastic spacer on option board
<1> Remove the nylon rivets from the front and middle parts of the pod.
<2> After connecting the option board with the PGA socket in the back of the pod, secure with plastic
screw supplied with the option board.
<3> To adjust the hight, use your own spacer or a stand.
Figure D-3. Mounting Method (When Mounting Plastic Spacer on Option Board)
Target system
Plastic spacer